[tp widget="default/tpw_default.php"]
 

how does golf club fitting work

how does golf club fitting work插图

In short,club fitting is the process of determining which golf club allows a player to:Consistently strike a ball closest to the center of the face,withClubface that squares to the target line with the sole of the club flush to the ground,thatOptimizes a player’s performance,feel and consistency,whileConsidering all design characteristics of a club (length,lie,loft,weight,swing weight,shaft material,shaft flex,CG,and more)

What is golf club fitting?

In short, club fitting is the process of determining which golf club allows a player to: Consistently strike a ball closest to the center of the face, with Clubface that squares to the target line with the sole of the club flush to the ground, that Optimizes a player’s performance, feel and consistency, while

How does a golf fitter analyze your performance?

First, your fitter will analyze your performance using your current set of clubs with the assistance of a launch monitor. Using a launch monitor will help your fitter to get very specific details on your club delivery and ball flight- two critical components of your fitting.

How do fitted golf clubs improve your game?

In fact, beginners to the sport and golfers with a higher handicap can “move the needle” exponentially faster through a professional club fitting as players don’t need to adjust or change their swing. Simply put, playing with fitted clubs is the fastest, most surefire way to improve your performance on the course almost immediately.

What does a club fitter look for?

Considering all design characteristics of a club (length, lie, loft, weight, swing weight, shaft material, shaft flex, CG, and more) Everybody has their own unique golf swing, and a club fitter’s job is not to try and overhaul. With every individual golf swing, there are two fundamental factors to consider:

What is an AP2 iron?

The AP2 irons are, “advanced performance, multi-material irons that offer playability, the traditional solid feel of a forged iron and contemporary yet classic looks for the skilled to highly skilled golfer. AP2 irons are technically advanced blades that provide increased forgiveness without sacrificing shot workability while combining traditional blade length and sole width with a more efficient multi-material weight distribution.”

What is Surefit Tour Hosel?

That means that your club can be independently adjusted to precisely fit your game with the help of a special wrench. You can adjust the lie of your club from a square position to either more open or closed.

How many balls does a 52 degree wedge hit?

We quickly found the right shaft, bounce and grind for the 52-degree wedge after hitting about 10 balls. But, before the fitting was completely over, it was time to put the 56- and 60-degree wedges to the test for a ball fitting.

What is a 913D2?

The 913D2 is a 460cc driver built for those in need of speed and forgiveness. The 913D3 possesses the same launch conditions as the 913D2, but is slightly smaller with a 445cc head. I liked the slightly smaller clubhead, so Gray immediately moved on to the 913D3.

What is the inquisitiveness of Gray?

Throughout the entire process, Gray is inquisitive, always asking things like, “What, if anything, feels different about this club from the last one?” “Did you hear the sound that one made compared to the last one?”

What did Gibson say when he backed off the ball?

When I backed off the ball, Gibson went into full-on teacher mode and said, “Earlier you mentioned you took a bunch of lessons in the last couple of years from someone you were really comfortable and confident with. What would he work with you on ? What was the one thought he tried to get across to you ?”

Who is Mike Gibson?

That’s where Mike Gibson, Titleist Golf Ball Fitting Manager and a former Teaching Professional at the Harmon Golf School, stepped in.

What Is a Golf Club Fitting and Why Do You Need One

As a golf beginner, you may be tempted to simply go out and buy a set of clubs off the shelf. However, it is important to realize that buying a set isn’t enough to ensure your success in this sport. You need one-on-one attention from a professional who can determine your playing style and then help you choose a club that will work for you.

How to Find a Qualified Fitter

Finding a qualified golf equipment fitter is the first step to getting fitted for clubs. You can ask friends and family members who they use or you can try to find someone at a local club. You can also contact golf companies directly since they usually have the best relationships with qualified fitters in the area.

What to Expect During Your Fitting

A professional fitter will take you through a series of different clubs to determine which club best suits your swing. They’ll ask questions about your playing style, including how often you play and what your goals are for the game.

The Benefits of Getting Fitted for Clubs

There are a number of benefits to having your clubs custom fitted for your playing style. If you’ve never had a golf club fitting before, here are some of the most important benefits you can expect to enjoy:

How to Choose the Right Clubs for Your Game

While it’s important to choose the right equipment, choosing the right clubs can be one of the most difficult decisions when you make the leap from beginner to the seasoned player. One of the most important decisions you will be making is which club to use when trying to hit a particular shot on the course.

Conclusion

A golf club fitting can seem like a daunting process, but it’s important for beginner golfers to get fitted so they can start off on the right foot (or swing). By taking the time to find a qualified fitter and go through the fitting process, you’ll be able to select clubs that are best suited for your individual playing style.

What is the Club Fitting Process?

It’s important to understand the process before going in for your fitting – being prepared can give you a much better experience and ensure you’re getting the best value for your time and money.

How Much Does A Golf Club Fitting Cost?

The average club fitting for a full bag runs around $350. Individual club fittings for drivers and irons cost an average of $150, while fittings for putters and wedges will be closer to the $100 range.

What is custom fitting in golf?

For example: having a driver that’s fit to your swing can help you optimize your ball flight, which will increase both your distance and accuracy. In fact, the majority of golfers who went through a custom fitting added over 20 yards to their drive and lowered their scores by as much as five strokes per …

What is a pre fitting interview?

Most professional club fitters start the process with an interview consisting of a short question and answer session between the fitter and the golfer. This allows your fitter to better understand your needs, goals, and concerns about your game.

Why use launch monitor?

Using a launch monitor will help your fitter to get very specific details on your club delivery and ball flight- two critical components of your fitting. Your fitter is also paying attention to your swing style, posture, and overall approach while this process is happening, giving them all the details they need.

How far should you gap in a short game?

Wedge gapping will help optimize for the correct lofts you should carry to best address your short game (120 yards and in from the pin).

How long does it take to fit a golf club?

Fitting a player for a full set of clubs usually takes around three hours from start to finish. Most professional fitters have the option of fitting for the full set, but also provide fittings for specific club types. Refer to the table below for some common guidelines:

Do swing changes have an effect?

Many golfers who are investing in fitting also will be investing in instruction in search of a better golf game. Can swing changes that players make influence the way their equipment fits?

How long does it take to fit a golf club?

In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges.

Why is club fitting so difficult?

Challenges often arise with club fitting because of preconceived notions that customers have. Those who pursue professional club fitting need to approach the process with an open mind and not let their expectations — or egos in some cases — interfere.

Who is Ed Grabowy?

Grabowy is certified as an Advanced Professional "Class A" Clubmaker by the Professional Clubmaker’s Society and a Professional Clubmaker by the Golf Clubmaker’s Association.

Does swing change affect lie angle?

Swing changes can affect lie angles, Grabowy acknowledged, but he added that "lie angle is most important to the better player, and overall there’s usually not going to be much change."

Where does Chris Wallace live?

He lives with his wife in Pinehurst, N.C.

Why is forward deflection important?

The reason forward deflection is so important to consider is that the more the shaft deflects forward, the more the face tends to close, and the more loft is added to the club through impact.

What to consider when striking shots on the face?

If a player is not striking shots on the center of the face, the first factor to consider would be the length of the club. A club’s length can have direct bearing over where a player tends to impact the face. A player that is striking shots low on the face and on the toe can usually benefit from a club that is slightly longer, while a player striking shots too high on the face and on the heel would typically benefit from a club that is shorter. This is as basic as club fitting gets, and it is only one piece of the puzzle.

Why do golf clubs bend forward?

Because of momentum, gravity, and the general physics of the golf swing, shafts bend forward before the clubface makes contact with the ball. The magnitude of this forward bending is what must be considered when fitting a golf club.

What are some of the words that clubfitters use to describe club fitting?

Confusing, black magic, techno-babble, alchemy, voodoo… these are all some of the words any clubfitter has heard used to describe club fitting. If a player spends time with 3 clubfitters, each fitter may reach 3 different conclusions, depending on their level of expertise, brand preferences and the tools/options available. This only adds to the confusion.

What are the characteristics of a golf club?

Considering all design characteristics of a club (length, lie, loft, weight , swing weight, shaft material, shaft flex, CG, and more)

What happens when a plane is not perpendicular to the direction it is moving?

This is because we are striking a sphere with a plane, and even if the centerpoint of the sphere is aligned with the centerpoint of the plane, if that plane is not perpendicular to the direction the plane is moving (face perpendicular to path), the side of the plane that is nearest the ball will strike the ball first.

Why is center face contact important?

Center-faced contact is crucial to many factors of ball flight. Primarily, it ensures that the maximum amount of energy transfers to the ball, giving the greatest potential for distance . It also eliminates “gear effect” that could be caused from striking the ball off the center of the face.

What to look for in a beginner golf club?

For beginners, it’s likely the expert recommends more loft on your driver, lighter shafts with less flex, and more forgiving irons. For example, if you’re a beginning golfer who has blade irons with long, extra-stiff steel shafts, it’s likely they aren’t right for your game. So even if your swing greatly improves with the help of a top instructor, you’ll be fighting an uphill battle.

Why is it important to get fit for beginners?

“It’s very important that beginners get fit because we develop our swings around the gear we use without even realizing it ,” Briand says.

What happens if a golf club is too short?

If a club is too short, too long, too light, too heavy, the lie angle is completely wrong, the club itself is the wrong design, or any of a number of factors are off , you could be setting yourself up for failure. The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.

Which is better for beginners: blade irons or left irons?

The game-improvement irons on the left will be much more forgiving and enjoyable for beginners than the blade irons on the right.

Who is Tim Briand?

In order to set the record straight, I spoke with a professional club fitter ( Tim Briand, Executive Vice President of GOLF.com’s sister company, True Spec Gol f) and a professional swing instructor ( Todd Sones, a GOLF Magazine Top 100 Teacher ). Even though Briand is a club fitter and Sones is an instructor, both experts agreed that learning the game using poorly fit equipment is a huge hinderance on both improvement and enjoyment.

How to set yourself up to play golf?

In conclusion, here are the recommended steps to take in order to set yourself up to to play great golf and enjoy the game for years to come: 1. Get a basic club consultation from an expert. 2. Make the proper alterations to your current set, or purchase a budget-friendly starter set (anywhere from 1-14 clubs) 3.

Will my swing patterns change?

It is likely that your swing patterns will change after a number of lessons. Your angle of attack may change, your method of releasing the club could shift, and you will (hopefully) gain some speed and strength, too.

What should my expectations be?

Depends! Every golfer who gets fit at Club Champion can expect to try a variety of options from a variety of brands. They should also expect to get an in-depth look at their game using TrackMan and/or SAM PuttLab technology. Some fitting types are very specific, like a wedge fitting, so those golfers should expect to learn a ton about that particular part of their game. It’s reasonable to expect to improve distance, dispersion/accuracy, comfort, and overall performance if your current clubs are even just a few years old, and it’s not uncommon for our fitters to find another 20+ yards off the tee. It’s even reasonable to expect a lower score once the fitted clubs arrive since our customers see an average improvement of six strokes per round. It’s most important to voice your expectations with your fitter so they can let you know what’s reasonable.

What will I learn about my golf swing and game (from a fitter’s perspective)?

You’ll learn your stock distances, what sort of shaft profile makes the most sense for your swing speed, what loft/lie makes sense for your attack angle, your smash factor, your spin rate, what swingweight helps you swing effortlessly, and so much more. If you’re going through a putter fitting, you’ll take a look at everything from head shape and toe hang to shaft length and grip size to better understand how each element adds up to fewer three-putts and more confidence on the green.

How does getting fit help lower scores?

Fittings lead to lower scores for many reasons, and it all depends on what part of the bag you dialed in. Our Statistically Speaking series on YouTube breaks this down shot-by-shot, but the general answer is this: with better distance and accuracy, you’re finding more fairways and greens in regulation, and with a putter you can rely upon, you’re sinking more putts. We find an average of 22 extra yards off the tee, 13 additional yards with irons, and six fewer strokes per round, just to name a few stats.

What happens next?

If you bought your clubs through Club Champion, the next step is to get them built by our master builders. Once they arrive and are checked out by your fitter one last time, you can pick them up and start shooting your best scores. If for some reason you aren’t seeing the same results on the course that you saw in the fitting bay, our Perfect Fit Guarantee has you covered. Additionally, it’s important to maintain your club specs — we offer free loft/lie adjustments for the lifetime of the club when you build through us. You can also regrip through your local Club Champion to ensure your best performance for every round.

What to bring to fitter for driver?

Your glove, athletic shoes or golf shoes, comfortable clothes, and a water bottle are all suggested as well. You’ll be taking lots of swings, so a snack might help too, though we do provide refreshments at our studios.

What does a fitter do for clubs?

At this point, your fitter will show you the recommended clubs, the costs and discuss any additional services like SST PUREing, stamping, paint fill, etc. that might make sense for you. If you’re retro-fitting your existing set, they’ll talk to you about the process of breaking down and rebuilding those clubs with the new components you found during your fitting.

Do you need to check back in with your club fitter?

Aside from updating your lofts/lies and regripping, you will not need to check back in with your fitter for your newly fitted clubs until it’s time for a new fitting. Fitting frequency depends entirely on your individual circumstances — if you’re wearing our your wedge grooves every season, you should be fitted for new wedges that frequently. If you only play casually and are properly storing and protecting your clubs, you can easily get a few years out of your fitted set. New club technology launches every year so there’s always something new to test, but you should plan to be fitted as frequently as it makes sense for your game.