[tp widget="default/tpw_default.php"]
 

how to fit a golf driver

how to fit a golf driver插图

How to choose the right driver for your golf game?

For most golfers, a selection of a driver with the largest head that they can control is their best choice. Choose a driver with a shaft of the proper length. Interestingly enough, most tournament professionals opt for drivers that are 44.5” long, while most manufacturer make “off-the-rack” drivers that are an inch or two longer.

How do you find the best fit for Your Driver?

This precise data is then used to find the best fit for your driver. Length is fit to optimize the best combination of consistency and distance. The best loft choice is determined to maximize launch angle and spin – key ingredients to optimizing distance. Shaft flex and type are determined to optimize trajectory, distance and feel.

How important are driver fittings in golf?

More times than not, a fitting focuses too much on comparing the BEST shot with one driver to the BEST shot with another. This is incomplete, at best, and in many cases will add strokes to your game rather than eliminate them. The table below compares two of the best single drives during a fitting for two different drivers.

How to reshaft a golf driver?

How to Reshaft a Golf Driver. 1 Step 1. Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don’t cut in to the shaft … 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items

What is clubhead speed?

Clubhead speed is a product of good swing tempo, balance, shaft weight, flex, aerodynamics and weight distribution. More clubhead speed means higher ball speeds, and that means longer drives. We match the driver to your swing and find extra ticks of clubhead speed for those coveted extra few yards.

Why do you need a higher spin rate?

Spin Rate. Spin rate can help maximize your distance, ensuring the ball flies far. Players with a lower clubhead speed need a higher spin rate to keep the ball in the air, while those with a higher clubhead speed need a lower spin rate to launch the ball properly and send it screaming through the air.

What is driver fitting?

It involves the customization of all the major aspects of a driver that can affect the playability, feel and overall performance of the club. Our trusted advisors use industry-leading TrackMan* technology to elevate your game. TrackMan utilizes groundbreaking dual radar systems to analyze every aspect of your swing. This precise data is then used to find the best fit for your driver.

Can you add videos to your watch history?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

What shafts do you use for a swing?

In general, people with faster swings prefer stiff shafts on their woods and iron shafts on the irons. People with slower swings are more likely to prefer flex shafts on the woods and graphite shafts on the irons.

What is wikihow video?

VIDEO. X. wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. wikiHow marks an article as reader-approved once it receives enough positive feedback.

What is wikihow like?

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 623,097 times.

How many testimonials does wikihow have?

wikiHow marks an article as reader-approved once it receives enough positive feedback. This article received 12 testimonials and 82% of readers who voted found it helpful, earning it our reader-approved status.

How fast can you swing at home?

It’ll be difficult to do at home. In general, though, most amateurs fall somewhere in the neighborhood of 80–85 mile (129–137 km)-per-hour swings.

How to measure for golf clubs?

To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don’t need to be in your swing stance.

What to do if you have a handicap?

If you’re not sure of your handicap, a basic description of your skill level can go a long way in helping the fitter match you with the right kinds of clubs that will help improve your game.

What are the three variables that determine driver performance?

Driver performance is based on three main variables: (1) Distance, (2) Accuracy/ Dispersion from the intended target , and (3) Face Impact . The goal of a driver is to consistently hit the ball as far as possible and at the intended target. This is how we determined the effectiveness of the two different length drivers.

What is the Smash Factor rating?

To go a little further into detail, this is an efficiency rating that divides ball speed by club head speed. The ball cannot leave the face faster than 1.5 times the speed that the club head is traveling. Therefore a perfect Smash Factor rating is 1.50. The closer this number is to 1.50, the more efficient the ball is rebounding off of the face. The Smash Factor helps us determine how closely the ball is hit to the sweet spot, and how efficient a player’s swing is. For reference, the PGA tour averages between a 1.48 and 1.49 Smash Factor reading. So how did the longer driver with an average club head speed increase of 1mph translate to ball speed? For the entire group of testers, we only saw an increase of .9mph ball speed.

Why fit a 43" driver?

One example is from a guy I fit not too long ago. The player was a strong guy, about a 15 handicap with some consistency issues. Anything longer than 43” resulted in erratic impact all over the face, with erratic ball flight to match. As soon as he had a 43” heavy, stiff driver in his hands, the contact on the face became much more consistent so did his ball flight. His launch conditions (speed, launch angle, spin rate, spin axis, etc…) improved dramatically as well. His club head speed (which is the reason that a person would go to a longer driver) was exactly the same as a 45.5” driver. Despite losing 2.5” of length, the speed was identical. This is a common occurrence during fittings on the TrackMan machine.

How fast did Ken Johns drop?

On the other end of the spectrum we had Ken Johns who actually recorded a decrease in club head speed with the longer driver, dropping from 106mph to 105.4mph for a .6mph reduction.

What is the role of the launch angle in golf?

Launch angle plays a primary role in how much spin we need on a golf ball. Across all swing speeds, the lower a ball is launched, a higher spin rate is needed to help keep the ball in the air. The higher a ball is launched, a lower spin rate is needed to maintain optimal trajectory. In a perfect world, we like to see a high launch angle with a spin rate that’s just high enough to maintain that trajectory.

Why is the 44.5 driver longer than the 45.5?

Those two reasons happen to be the same reasons why the 45.5” driver carried longer. The lower launch and lower spin rate from the 44.5” driver created a more penetrating (flatter) ball flight.

How fast does a swing increase with a longer driver?

On average, the entire test group’s swing speed increased with the longer driver, increasing from 102.8mph to 103.8mph.

What is a tip stiff shaft?

Some shafts are ‘tip-stiff’, meaning the tip section near the clubhead is stiffer in relation to the rest of the shaft. Or ‘grip-stiff’ which keeps the upper end of the shaft firm to help reduce spin.

Why do you need torquing shafts for a high speed swing?

It is very helpful for your miss-hits and for when you make a bad swing. If you’re swinging badly at a high velocity then you need all the help you can get to keep the face as square to the ball as possible.

What happens if your golf shaft is too light?

A shaft that is too light will cause you to swing out of control and lose consistency. You may lose feel too, which is very important when hitting the driver since it is the longest club in your bag.

What is torque in golf?

Torque refers to how much the shaft twists. It’s the least talked about feature but still an important one to club fitters. High torque shafts can twist easily, and low torque shafts are resistant to twisting.

How much does a driver shaft cost?

It always comes down to price at the end of the day and we are always looking for the best deal. A driver shaft can cost anywhere from $40 – $300.

What is a bend profile?

The bend profile takes into account how your entire shaft kicks. Not just the location of one spot. With today’s technology, custom club makers can adjust the shaft at any place. There is no excuse to have the wrong shaft.

What does playing the right length driver shaft do?

Playing the right length Driver Shaft will increase your accuracy!

What is loft in golf?

Loft is the angle of the clubface relative to a vertical line perpendicular to the ground. Loft has considerable influence on the launch angle and spin rate of a golf ball, although other factors such as shaft type and model also influence launch conditions. PING drivers are offered with different lofts to fit players of varying swing speeds, swing tendencies and ball-flight preferences.

How does length affect golf?

Altering the length of a driver can have a significant effect on performance. As length is evaluated, keep in mind the trade-offs in performance that can govern changes in driver length. Table 2 displays how altering length while maintaining a constant swingweight can affect performance. For example, for a 1-inch increase in length, the carry distance increases an average of 4 yards. As a general rule, an increase in length can increase distance, but will usually lead to a significant decrease in accuracy. There is also a point with most players where increasing length will lead to shorter distances due to poorer contact, though this point is highly dependent on the player.

What is the average driver length for a ping pro?

For PING pros on the PGA and European tours, driver lengths range from 44.25″ to 46″, with an average of 45.25″. On the LPGA Tour, lengths range from 44.5″ to 48″, with an average of 45.25″.

How does swingweight affect performance?

As with irons, overall swingweight can affect performance by influencing the way a club is delivered. In general, heavier swingweights and total weights tend to fight a miss to the left, while lighter clubs tend to fight a miss to the right. Most equipment manufacturers have dialed in swingweights for their drivers that provide the best performance for the overall population, but weight and balance should be part of the fitting discussion.

How does shaft fitting affect golf?

Players have a vast array of choices when it comes to shaft fitting. Various combinations of weight, flex, and torque can affect the way a shaft feels and performs. Ultimately these shaft properties can not only have a big effect on how a driver feels as it is swung and as it impacts the ball, but also can influence the trajectory that can be achieved with a given model.

Why is tee height important?

Tee height is important to optimizing trajectory and distance with the driver. When teed too low, the ball typically launches lower with excessive spin. When teed too high, the ball may impact high on the face, leading to a higher launch angle than desired with insufficient spin. Hitting too high or low can also significantly affect ball speed. Typically, an average tee height that places the equator of the ball even with the top edge of the driver face works best for most. Particularly in an indoor environment, it is important to ensure that one can adjust tee height and achieve a sufficient tee height during a fitting. If you are not comfortable with the tee height during the fitting, be sure to discuss this with your fitter.

What is a driver golf club?

The driver is typically one of the most fitted and often replaced clubs, and is usually the most-expensive club in one’s bag. A properly fit driver can have a dramatic effect on distance, accuracy, consistency and confidence; maximizing the opportunity for optimal results. When looking at driver fitting many principles from an iron fitting carry over, but there are some unique aspects to the driver (e.g. some elements of adjustability).

How much loft do you need for a golf driver?

If your swing speed is over 100 mph and you hit the golf ball a long way, you should have a driver with a loft of about 12 degrees, or less , and that will produce less backspin. But if you are like most golfers with swing speeds that are below 90 mph, you will need a more lofted driver that increases that backspin to keep the ball aloft.

How long should a golf driver be?

Choose a driver with a shaft of the proper length. Interestingly enough, most tournament professionals opt for drivers that are 44.5” long, while most manufacturer make “off-the-rack” drivers that are an inch or two longer. Once again, there is no correlation between the length of your driver and the distance of your tee shots. You should find a driver that you can consistently hit the ball on the center of the club.

What determines the right driver for a golfer?

Choosing the right driver depends on length, loft and the golfer’s stroke.

Where did Bill Herrfeldt graduate from?

Bill Herrfeldt specializes in finance, sports and the needs of retiring people, and has been published in the national edition of "Erickson Tribune," the "Washington Post" and the "Arizona Republic." He graduated from the University of Louisville.

Is trajectory rating the same as loft?

Don’t think that trajectory rating is the same as loft. For instance, a driver may have a 10-degree loft, but if its center of gravity is toward the front, it will react more like a driver with an 8-degree loft.

Who is Bill Herrfeldt?

Bill Herrfeldt specializes in finance, sports and the needs of retiring people, and has been published in the national edition of "Erickson Tribune," the "Washington Post" and the "Arizona Republic.". He graduated from the University of Louisville.

How to secure a ferrule to a shaft?

Place the ferrule onto the shaft. To do this, place a small amount of epoxy on the inside of the ferrule and slide the ferrule onto the shaft, narrow end first. Place your clubhead on top of the ferrule and place the grip end of the club on the floor. Butt down the grip while pushing down on the clubhead to secure the ferrule at the correct depth on the hosel.

What does a new shaft do for a driver?

A new shaft can put the wallop back in your trusty driver and have it hitting like a brand-new club. One of the nice things about replacing a driver shaft is that there is generally no tip trimming involved.

How to prep a new driver shaft?

Prepare the tip of the new driver shaft by scraping the paint and polyurethane off with a sharp knife. Make sure you don’t cut in to the shaft or create a flat spot by scraping too much.

Where is Patrick Cameron?

He works out of his home in Denver, Colo. He received his Bachelor of Arts in mass communication from the University of Minnesota.

Can you replace a shaft?

Replacing your old shaft can be a relatively painless process for you or your local repair shop.

How to tee the ball in a stance?

You also want to tee the ball up in the forward portion of your stance, just inside the lead heel. This will allow you to catch the ball at the end of your swing arc when you are hitting up on the ball. To get this position, set up with your feet together even with the ball and then taker a wide step back with your trail foot. This will put you in a nice, wide base to make an athletic and powerful swing.

How to swing a golf club with a trail hand?

Next, put your trail hand on the club. When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing.

How to make a solid swing?

Spine tilt. Once you get in this position, grip the club in your lead hand. Your shoulders should be level and square at this point. Next, put your trail hand on the club . When you do this, your spine will naturally tilt back away from the target and put you in the correct position to make a solid swing. 4.

Why is it important to nail down the fundamentals of a driver?

Because of this, it is extremely important to nail down the fundamentals of a driver so you can wield the big stick with confidence.

Where should the ball sit when teeing up?

You typically want about half the ball to sit above the face of the driver when you tee it up. This makes is easier for you to hit up on the ball and elevate the ball off the tee. 2. Stance. You also want to tee the ball up in the forward portion of your stance, just inside the lead heel.

Do you need to tee the ball up?

Before you even think about your swing, you need to tee the ball up. This might seem simple, but it is a key for hitting the driver consistently as you want to have the ball teed up at a uniform height every time.

Who is Zephyr Melton?

Zephyr Melton is an assistant editor for GOLF.com where he spends his days blogging, producing and editing. Prior to joining the team at GOLF.com, he attended the University of Texas followed by stops with Team USA, the Green Bay Packers and the PGA Tour.