[tp widget="default/tpw_default.php"]
 

how to make golf ball ladybugs

how to make golf ball ladybugs插图

How to make your own golf ball ladybugs?1. Clean your golf balls Use sandpaper to smoothen these golf balls. Wash let it dry.2. Spray primer Spray a primer on the surface of the balls to make sure the paint adheres. Let it dry.3. Apply red paint

How to draw ladybugs on golf balls?

Spray primer Spray a primer on the surface of the balls to make sure the paint adheres. Let it dry. 3. Apply red paint Apply the red paint to your golf balls. Add black paint to draw the face and body of the ladybugs. You can add a varnish. Let it dry and display! Click on any image to start the lightbox display.

How do you make a bird out of a golf ball?

Mark your locations for legs and antennae and drill the holes in the golf balls. I drilled mine approximately 3/4″ inch deep. BIRD: The bird’s tail is created with one 10″ piece of wire, shaped in a loop , and inserted into 2 holes at back of golf ball.

How many golf balls do you need to make a Buggie?

Golf balls (one per buggie, unless you’re making something like caterpillars or ants where you join several together) The bird beak/bill is a metal screw.

What do you need to make a golf ball lady bug?

All you need is red spray paint, a black paint pen or permanent marker, and a couple of googly eyes to glue on. You could paint the eyes on with a white paint pen if you wanted but I thought the googly eyes were easier. Once your golf ball lady bug is finished, just find a cute place in the garden to put her!

How to make a lady bug swarm?

Instructions. Place the golf ball on the newspaper and spray with red spray paint. Let dry. Repeat if you need a second coat of paint. Using the black marker or paint pen, draw the lady bug markings as show. A stripe down the middle, three or four spots on each top/side, and a ‘face’ on the front.

How to draw ladybugs?

Using the black marker or paint pen, draw the lady bug markings as show. A stripe down the middle, three or four spots on each top/side, and a ‘face’ on the front.

Who is Diane from Good Pill Pharmacy?

Diane is a professional blogger and nationally certified pharmacy technician at Good Pill Pharmacy. She earned her BS in Microbiology at the University of New Hampshire and has worked in cancer research, academics, and biotechnology. Concern over the growing incidence of human disease and the birth of her children led her to begin living a more natural life. She quickly realized that the information she was learning along the way could be beneficial to many others and started blogging and freelance writing to share this knowledge with others. Learn more about her HERE.

How to make a bumblebee with a golf ball?

Step 1. Decide which buggies you want to make and gather the materials. Step 2. Wash and dry the golf balls. Step 3.

What color are ladybugs?

Bird = blue body and tail, yellow legs. After drying, you will paint the beak yellow, and create eyes with white paint and the black Sharpie. Ladybug = red and black body, black legs and antennae. After drying, you will add black spots with paint or a Sharpie.

What to draw with a black Sharpie?

After drying, you will use a black Sharpie to draw the eyes, nose, and mouth. Bumblebee = yellow body with black legs and antennae. After drying, you will use a black Sharpie to fill in the black body stripes. Bird = blue body and tail, yellow legs.

How to attach antenna to a wire?

Insert legs and antennae into drilled holes. If they don’t fit snugly, add a bit of adhesive to the wire end and then insert it in the hole.

How to get good curls on wire?

To get good curls, start with the tips of the wires in the pliers, and curve the wire around the pliers.

How many holes are there in a bird’s tail?

BIRD: The bird’s tail is created with one 10″ piece of wire, shaped in a loop , and inserted into 2 holes at back of golf ball.

What to do with eyes on a washer?

Eyes: Fill in the center of the washer with black Sharpie.