[tp widget="default/tpw_default.php"]
 

how to remove the governor on a ezgo golf cart

how to remove the governor on a ezgo golf cart插图

Once you have the necessary tools,follow these steps to remove the governor:Disconnect the negative battery terminal from the cart. This will prevent any accidental sparks from occurring.Remove the screws that hold the governor’s cover in place. …Use the wire cutters to cut the zip tie that holds the wires to the governor.Remove the screws that hold the governor to the battery pack.

How to replace a governor on a golf cart?

Use the wire cutters to cut the zip tie that holds the wires to the governor. Remove the screws that hold the governor to the battery pack. Having taken off your golf cart’s existing governor, you can now place a new one back into its original position and reattach it with screws.

How do you adjust the governor on an EZ GO TXT?

On a gas-powered E-Z-Go golf cart, here’s how to adjust the governor. Locate the governor arm, which is located on top of the rear axle case, which is below the cart. Loosen the adjusting locknut that is located at the end of the governor spring. Tighten the adjustable locknut until it is snug. How can I make my EZ Go TXT 36 volt faster?

How do you adjust the speed on an EZ GO golf cart?

Tighten the governor spring located in the engine of most golf carts to adjust your cart’s top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.

Can you drive a golf cart without a governor spring?

If you don’t have a central governor spring, you can still get your cart to move a little faster. Locate your clutch pedal and line. The clutch is the pedal (sometimes a handle near your knee) that you use to put the car into reverse or change speeds.

What do you need to tighten a golf cart?

First of all, you’ll need a handful of wrenches that can be easily adjusted. These wrenches will be used to do things like tighten the governor screw on a golf cart and make it easier to tweak. You may also need some wrenches to open up your engine or other panels on your cart.

How fast is an EZGO golf cart?

A typical EZGO golf cart has a top speed of about 15 miles per hour or so and removing the governor is known to add another seven or eight miles per hour to its operating speed.

What are the different golf cart manufacturers?

As mentioned previously, we are going to discuss three golf cart manufacturers in this article: EZGO, Yamaha, and Club Car.

How fast can a golf cart go?

That may seem disappointing but is just part of how the cart operates. You may, therefore, only be capable of speeds of up to 10-15 miles per hour.

Why do golf carts have governors?

Golf cart manufacturers put a governor on their vehicles for a reason – they enhance the safety of a cart and keep it from becoming potentially dangerous to a driver. By removing the governor, you are increasing the speed of a cart that may not have extensive crash protection design or even seatbelts.

What part of a cart keeps the cart’s speed at a safe level?

However, there is also a part known as a governor that keeps your cart’s speed at a safer and more reasonable level.

What happens if you crash 20 miles per hour?

So if you crash when driving 20 miles per hour versus five miles per hour, you are likely to cause four times the amount of damage. And even if you only get double the speed, that’s still double the danger. And don’t forget that you’re also putting more strain on your cart’s motor, as well.

How Does a Golf Cart Governor Work?

A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.

How to disconnect throttle cable from carburetor?

Remove the cable from the carburetor to the governor followed by disconnecting the throttle cable from the governor and connecting it directly to the carburetor. However, this option may sometimes cause the throttle cable to break due to pressure on it at high speed.

How to increase the speed of a cart?

Loosen the nut fitted on the cable. This will gradually increase the length of the cable. As the length increases, the speed of the cart will increase accordingly.

How fast is an EZGO golf cart?

The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.

How to get a golf cart to go full speed?

Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart. You may have to do steps 6 and 7 a few times before you get the desired speed for the golf cart. To check if you’ve achieved the desired speed, it’s recommended that you go at full speed …

How to adjust golf cart governor?

The governor on a golf cart can be adjusted easily by loosening the tension on its springs using a wrench or screwdriver to get the golf cart going at a relatively faster speed.

How many ways can bypassing the governor be done?

This involves bypassing the governor and can be done in three ways.

How fast can a golf cart go?

Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you’ve got a few minutes, some simple mechanical know-how and a wrench, you can double the speed of your cart and zip through your round.

How to adjust a gas pedal on a cart?

Using your wrench, remove the bolt on the gas pedal shaft. Slide the shaft up so there is more play in the gas pedal. Tighten the bolt and then start the cart. You may need to adjust the gas pedal shaft a couple of times before you have it to your liking.

How to remove governor from golf cart?

How to Remove the Governor From a Golf Cart. You hit the links. The course is open in front of you as far as the eye can see. The only thing holding you back is the put-put-puttering of your golf cart. Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you’ve got a few minutes, some simple mechanical know-how and a wrench, …

Where is the governor on a car?

The governor generally sits on top of the engine . This is the easiest way to find the carburetor. Once you’ve followed the cable up to the governor, disconnect it there as well. You can save this cable for later use or throw it away.

Where is Patrick Cameron?

He works out of his home in Denver, Colo. He received his Bachelor of Arts in mass communication from the University of Minnesota.

Who is Todd Mrowice?

Todd Mrowice is a Staff Writer for GolfLink. He has been writing about golf for over 10 years including a long tenure at GOLFChicago Magazine. Todd has covered all aspects of the game including travel, products, business, and professional tours.

How Does a Golf Cart Governor Work

Governors play an important role in electric golf carts by limiting the speed they can travel. This is an important safety feature, as it prevents the cart from going too fast and helps ensure passengers’ safety.

How to Take the Governor off a Golf Cart

Removing the governor from a golf cart is a simple process that can be done with common tools. Here’s what you’ll need:

Frequently Asked Questions about Golf Cart Speed Governors

If you’re looking for ways to speed up your golf cart, there are a few things you can do. Start by removing the governor on top of the engine if you haven’t already. If it doesn’t have a governor, then you’ll need to open up the cart and look at the gear shaft to see if it’s turning.

How to make a golf cart go faster?

Loosen the small nut and tighten the larger nut. The more you tighten the larger nut, the faster your cart will go. Start slowly, only tightening the nut a quarter turn to start. You can over-stress the engine if you try to run it too quickly, and it will skip and potentially burn out if you are too eager.

How to get a cart to move faster?

1. Remove the seat and plastic covering over the engine. Sometimes you’ll need to remove screws while some models have seats that pop right out. Expose the engine so that you can get to work adjusting the motor. If you don’t have a central governor spring, you can still get your cart to move a little faster.

How to tell if a gas pedal is a governor?

Follow the thickest cable coming from the gas pedal until your find a small spring wrapped around a metal rod. This is the governor. The spring apparatus will have two nuts, one small nut and one larger nut, holding it onto the rod.

How fast can a golf cart go?

Adjusting the governor can make your golf cart go 5–10 mph (8 .0–16.1 km/h) faster. If you do this to an E-Z-GO golf cart, you might be able to go from 15 mph (24 km/h) to 22 mph (35 km/h). It will only take about 5 minutes to do it. Steps.

How to change the speed of a car?

Locate your clutch pedal and line. The clutch is the pedal (sometimes a handle near your knee) that you use to put the car into reverse or change speeds. You can adjust the clutch to send more gas to your engine, moving you faster. …

How to remove the black plastic cover on a golf cart?

Remove the screws from the black plastic cover at the rear of the seat. There should be five screws in most models. The engine is in the front of golf carts , underneath this panel. Take off the plastic cover and set it aside with the seats.

How to raise the top speed of a golf cart?

To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly. If you cannot find this spring, you likely have a newer model that is more difficult to adjust, though this is rare. Lift up the seat. Remove the seat cousins, which hide the engine.

How fast can a golf cart go without a speed control?

A typical electric cart without an upgraded speed control tops out around 12 mph. If you go this route, anticipate an upgrade cost around $700.

How to make a cart faster?

Step 1. The first option to making your cart faster is to replace the electronic speed control. This will enable more voltage to pass to the motor, producing the desired result. Unfortunately, this upgrade is not inexpensive as the unit can run anywhere from $100 to $1,000. Step 2.

How much does it cost to replace a cart motor?

This is probably the most extreme measure you can take to remedy your speed issue, and you can expect this to cost around $1,000 with labor.

What is the maintenance on a golf cart?

This includes battery and wiring inspections, refilling battery water, washing the cart, and anything else mentioned in your specific manufacturer owner’s guide.

Can you drive a golf cart faster?

It should be noted that the golf cart you are trying to make faster may not be designed to do so. Weigh the options carefully and exercise caution whenever driving a golf cart at any speed. Remember that golf carts are not equipped with seat belts, air bags and other safety equipment that you find in automobiles.

Can you own a golf cart?

Owning your own personal golf cart certainly has its advantages, especially if you live in a cart-friendly community or belong to a private country club. As time goes on, the number of electric golf carts replacing gas carts continues to grow. One thing that electric cart owners find themselves wondering, however, is how do you make an electric golf cart faster?

Can you post anything on social media?

Anybody can post anything on social media. When it comes to altering your golf cart, you should only trust experts, not those who play one on Twitter.