How do you pure a golf shaft at home?Clamp the grip end of the club in a vise.Test the alignment of the spine.Tape a strip of masking tape around the shaft just above the club head.Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder.Fit the club head and grip to the shaft.
What is Spining in golf?
Spining (one n, as in spine) is a term that applies to golf shafts and describes a process of matching all the shafts within a set of clubs so that their most consistent bending positions all point in the same direction. Spining is a service to golfers offered by some custom club…
Should I spine align my golf shafts?
The shaft oscillates and if it doesn’t do this consistently it can lead to misses. It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion.
What is the best orientation for the spine in golf?
Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane. This is explained in detail in this article but it is felt that most benefits come to the golfer when the spine is aligned in the droop plane orientation.
Do you need spine alignment in a driver?
Spine Alignment In A Driver This is an interesting one, especially with the modern adjustable drivers we now see everyone use. Being able to change your club settings means that you will move the spine around which can affect the performance of the club. You should have your club spined then don’t adjust it.
What Is Spine Alignment In A Golf Shaft – Pros And Cons, Is It Even Necessary?
This is a subject for the real golf equipment geeks out there, or for those who aspire to be in this camp.
Is There A Tool You Can Use?
All you really need is a way of securing the club so that you can get the head oscillating freely as per this video.
What is swing plane?
The swing plane means that the spine is perpendicular to the clubface and the droop plane is parallel with the clubface. This is a piece of advanced club builder knowledge that can make a difference to the feel and performance of your clubs.
Why do you need to spine align your shafts?
It is thought that by spine aligning your shafts you will create more consistency in your game and reduce your shot dispersion. This process can also help improve the feel of your clubs during the swing. These all seem like outcomes most golfers would want to have in their bag.
How many spines does graphite have?
Graphite shafts actually have two spines, creative called “S1 and S2” by the industry. These are the two stiffest oscillation points.
What does it mean to change your club settings?
Being able to change your club settings means that you will move the spine around which can affect the performance of the club. You should have your club spined then don’t adjust it.
What happens to the shaft during a golf swing?
During the golf swing the shaft is under severe strain.
What does SST mean on the PGA Tour?
when the SST Company started on the PGA Tour,they were the new kids on the block, and they mostly did retrofits, meaning they took a club or set, pulled the shaft, clean ed the shaft up, put the pulled shaft on their machine, marked it, and then re-installed the shaft in the new aligned position.
Does FLO increase consistency?
The anecdotal evidence that exists, doesn’t come close to proving that FLO is the reason for the apparent or perceive increase in consistency . It’s just as likely that the potential benefits come from neutralizing residual bend or from changing the flex pattern of the shaft. Until we can accurately and comparatively profile a shaft’s flex performance, it’s impossible to ascertain the relative merits of alignment. At this point, no one even agrees where to index the NBP or FLO plane.
Can a shaft cause a miss hit?
Of course how much the shaft can cause a shaft induced miss hit is a total toss up. This depends on how asymmetrical the shaft is to begin with, also on WHERE that asymmetry is in relation to the swing path. A BIG one is whether the golfer has a later release or not – for golfers with an early to midway release, all this possible movement of the shaft off the swing path happens BEFORE impact, so for the early/midway release players, spine-ing, PUREing, FLOing does not really do anything. It’s really only the later to very late release players who have a chance of experiencing a shaft induced miss hit from the shaft’s asymmetry.
Does an out of round shaft flex?
Other than SST’s limited testing, there seems to be nothing but hearsay evidence of any benefits and of course, the common sense conclusion that a seriously out of round shaft may not flex consistently. The quality of shafts has increased dramatically over the last 20 years and what was done 10-15 years ago to identify "out of round" or inconsistent shafts, is probably not as applicable in 2012.
Do SST licensees do testimonials?
I think if you contacted any to all of the SST licensees who do this on a daily basis for real golfers , you probably can find that some of them are proactive enough to have collected testimonials from some of the golfers they have done this for.
What is a Flo plane?
All clubs experience some amount of oscillation during the swing. The goal of Flo Plane Orientation is to align the shaft and club head in a straight line (plane). This results in a horizontal back & forth oscillation. When correctly placed in the direction of the ball at impact, more distance and accuracy is achieved. A non-flat line consists of oscillation in a circle or an oval pattern. Which means the club face is on a wobble coming into impact. Therefore, the golfer’s shots tend to spray, due to uneven contact with the club face and ball.
What is the principle plane of oscillation?
All Shafts have a Principle Plane of Oscillation. The subjects of “Spining and FLO” go hand in hand together when dealing with perfecting shafts for your clubs. The subject of FLO (Flat Line Oscillation) refers to how the golf shaft and is supposed to oscillate when loaded in your back swing through ball impact.
What is the purpose of Flo?
The purpose of FLO is to identify the most stable plane (as per SST PURE or the process of Puring). So, Flo Plane Orientation identifies the weak and strong oscillation planes on the shaft. The stable plane will provide FLO for the shaft during swing motion. A spine finder is used to find the natural bend point (NBP) of a shaft, …
What is shaft in physics?
Put simply, a shaft is a spring, which is affected by restoring force when load is applied to it. This is proportional to the amount of deflection and the stiffness of the shaft. Because the cross-section of the shaft is not perfectly symmetrical, then it will have a weak plane and strong plane. The purpose of FLO is to identify the most stable plane (as per SST PURE or the process of Puring).
What is a spine finder?
A spine finder is used to find the natural bend point (NBP) of a shaft, and then used as a reference point to find FLO. The NBP is the weak plane and the strong plane (not necessarily the spine) is 90 degrees opposed. The stable plane should be installed to face the target.
What is a non-flat line in golf?
A non-flat line consists of oscillation in a circle or an oval pattern. Which means the club face is on a wobble coming into impact. Therefore, the golfer’s shots tend to spray, due to uneven contact with the club face and ball.
What does a non linear pattern on a golf club mean?
Obviously, a non-linear pattern indicates erratic behavior by the club when loading it and striking the ball.
What Is Spining?
We turned to golf equipment guru and custom clubmaker Tom Wishon, founder of Tom Wishon Golf Technology, for a more in-depth explanation of spining.
Why is spining important?
Spining was once a pretty important service provided by custom club fitters to highly skilled golfers and to other golfers who love diving deep into the technical side of golf equipment. But with the improved golf shaft manufacturing standards of today, is spining still important?
What is a spin in golf?
Updated February 06, 2020. "Spining" (one "n," as in "spine") is a term that applies to golf shaft s and describes a process of matching all the shafts within a set of clubs so that their most consistent bending positions all point in the same direction. Spining is a service to golfers offered by some custom club makers and some club fitters.
Why do golf shafts have spines?
A golf shaft is said to have a ‘spine’ if it is inconsistent in its stiffness when bending in different directions. Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called ‘spining.’.
Is spining golf shafts a service?
The answer to this question is easy: No. The spining of golf shafts is not something that any recreational golfer needs to be concerned about, nor is it a service on which any recreational golfer needs to spend money today.
Do golf shafts have consistency?
Wishon continued: "While the top-quality shaft makers do manufacture shafts with very high accuracy and consistency, there are shafts in the golf industry that possess a variation in the consistency of the stiffness about their circumference. If severe enough, these inconsistencies can cause misdirection problems when the shaft is installed in such …