How-to Measure a Driver shaft lengthSet the driver on the ground as you normally would to hit a golf ballTake a 48 inch measuring stick or tape measure and place it on the groundMeasure from the grip end of the driver down do the heel of the club to get your measurementMore items
What is the "ideal" driver shaft length according to height?
This means that the ideal shaft length for his driver will be 45.5 inches. You may also need to make some adjustments to the lie of your driver. Driver shaft length for 5’5” |5’6” |5’7” |5’8” |5’9” |5’10” |5’11”
How to determine Golf driver length?
Wrist to Floor MeasurementStand on level ground with your golf shoes on,or comparable height athletic shoes.Grab either a flexible measuring tape or yardstick.Stand up tall and use the measuring tape or yardstick to measure from the floor up to your wrist.Use the measurement and your height to find the proper length clubs for you using the chart below. …
How long is a standard shaft on a golf driver?
“The standard driver length of 45.5-46.5 inches offered by the majority of companies is too long for most golfers and will prevent them from achieving their maximum potential for distance and accuracy.” Most driver shafts were around 43 inches until the early 1990s. The stock standard now is anywhere from 45.5 to 46.75 inches.
How to maximise your golf driver distance?
The top 10 ways to gain distance regardless of your skill levelCenter Contact. Center contact is so important for golfers. …Swing Faster. This seems obvious but you have to practice swinging faster to speed up your swing. …Shaft Lean. Working on shaft lean can be very difficult for a lot of golfers. …Longer Hand Arc. …Use the Ground. …Upgrade Equipment. …Get in the Gym. …Better Sequence. …Faster Tempo. …Change Your Golf Ball. …
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How much weight can you gain with a 45 inch shaft?
Increasing the length of a 45 inches shaft by an extra inch will help you gain about five to six heavier swing weight points and will affect your timing. The shaft will also be a bit more flexible and softer than it was before the extension.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over …
How to shorten a golf shaft?
Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker.
Why is a short driver shaft better?
Moreover, a short shaft helps you gain better control .
Why are steel shafts smaller than graphite shafts?
Steel shafts are smaller than graphite shafts because of their weight.
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Why is it important to have the right length of golf shaft?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency and confidence in your golf clubs.
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why do you need to get fitted for golf clubs?
By having an accurate read of the length of the club you are able to hit shots more consistently which will help with better performance on the golf course. This is why getting fitted for golf clubs is a great choice if you are serious about improving your game.
Do taller golfers need longer clubs?
The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well. For example if you are over 6 ft 2 there is a good chance that you would be better suited to using golf clubs for tall men oppose to using a standard golf set.
How to measure putter length?
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel. As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options. In Option A, this represents a non-offset center-shafted putter like a Titleist Bullseye. Measuring length is not referenced by the heel, rather the shaft axis so the 48” rule is placed alongside of the putter’s shaft at the point it intersects the ground up to the edge of the grip cap.
What is the best way to measure club length?
Regardless of the method one uses, the key is consistency. This is why there are jigs or fixtures for measuring club length. A prime example would be a product that Hireko offers called the Dynacraft Bench Ruler Soleplate works in conjunction with a 48” aluminum ruler and can be laid flat on a table or workbench. There is a roll pin that the bottom of the club’s sole rests against. This is a rather inexpensive item that can speed up and accura
How to measure golf clubs?
This is how we measure our clubs at Hireko. A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club’s heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
What happens when the heel is raised higher off the ground than the toe?
If the club is placed with the toe raised higher off of the ground than the heel, then the measurement will less than measured with the center of the sole touching the ground. Conversely, if the heel is raise higher off the ground than the toe, then the measured length will be increased. Those not careful in positioning …
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.