How to Measure the Length of a Golf ClubUse a ruler-Some people use tape measures to measure the length,but the best item to use is an aluminum ruler. …Stand the golf club at the address-The best way to measure your golf club is by standing it at address. …Place the straight edge of the shaft enabling the corer to touch the ground. …More items
How do you measure a golf club length?
Method 1: Golf club measuring ruler techniquePlace your club in the playing position. This should be your normal gripping position of the club.Make sure that the center of the clubs sole is touching the ground.Your ruler must be placed behind the club touching the ground.Align the part of the club that touches the ground with the back of your club’s heel.More items…
What is the standard length for a golf club?
What Is the Standard Length of a Golf Club?Rules of Golf. The rules regarding golf club construction are found in Appendix II of the Rules of Golf,published by the United States Golf Association.Graphite Vs. Steel. …Drivers. In a 2010 “Golf Digest” article,PGA Tour player Bubba Watson said the typical off-the-rack driver is 45.5 inches long.Irons and Hybrids. …
How do you size a golf club?
Measuring Your Clubs in Five StepsUse a forty-eight-inch sturdy straight edge aluminum ruler. …Don’t use your workbench to measure the golf clubs. …The straight edge should be placed so that the corner is touching the ground. …The straight edge should be pressed as close as possible to the shaft. …
What are the different degrees on the golf clubs?
What Golf Clubs Have 22,25,26,and 27 Degree Lofts?27 degrees loft angle – 5-iron,although there are some woods and hybrids too with the same loft.26 degrees loft angle – this is a 5-hybrid or 4-iron.25 degrees loft angle – this also could be a 4-iron.22 degrees loft angle – typically,a 5-wood is lofted between 20 degrees and 22 degrees.
Can Golf Clubs be Lengthened?
Yes, golf clubs can be lengthened, though it’s not an easy task. Most clubs follow a half-inch rule when you look at the different sizes, like in the chart above.
When do You Need Custom Golf Clubs?
When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why do putters have longer shafts?
If you had a shorter putter, you’d almost certainly tap the ball too hard most of the time. A longer shaft allows for gradual adjustments instead of quick, direct hits .
What happens if your woods aren’t longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
How to determine the correct length of golf club?
You can deduce the appropriate length for the golf club using overall height and the wrist-to-toe measurement from the table. For instance, for a golfer with a height of 6’3″ and a wrist to toe measurement of 39″, the proper club length adjustment would be ½”.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
How long should a golf club be?
There is no standard measure for how long your golf clubs should be. It would be best to consider several factors such as your overall height, swing style and the distance between your wrist and toe. The above chart illustrates how you can determine the length of your golf club using the three dynamics.
Why are handicaps important?
Handicaps have proven to be useful in many ways. The data helps determine the best measurements for a custom-made golf club. Amateur players with a high handicap have a great chance of improving their game using custom fit golf clubs.
What is dynamic fitting?
Professionals call it dynamic fitting. Fitters also measure your swing speed to determine which flex is appropriate for your kind of swing speed. With the three dynamics in place, fitters can develop the perfect golf club length explicitly designed for your type of game.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
Why do you not pick a red coat?
For instance, you do not just pick a red coat because you love the colour. There are many factors that you need to consider, such as the material used. Customizing a golf club with the correct length for your height will result in an outstanding performance on the course.
Why should I care about golf club length?
There are no specific industry standards for golf club length, but different manufacturers have differing lengths for clubs. A 5-iron from a particular brand is 37.75 inches, others 38 inches or even 38.5 inches long.
Why is a slow swinger better than a high lofted driver?
Typically, a slow swinger benefits from a higher lofted driver due to the high trajectory and longer carry. The Shaft Kick Point or Bend Point is the part of the shaft that bends the most when swinging your driver and should be kept in mind when choosing a driver.
What is the shortest club in golf?
The putter is the shortest club in your bag used to put the ball in the hole. They vary in length between 33″ and 35” depending on the manufacturer.
Why is flex important in golf?
Having a proper flex for your swing speed is essential because it allows you to make solid contact consistently, which affects both your direction and distance.
What is the length of fairway woods?
Fairway Woods. Woods can either be 3,5,7,9 or 11-wood. They are preferred by players who find drivers challenging to use. They are the second longest clubs in your bag ranging between 40 and 43 inches according to the manufacturer.
How long is a golf driver?
Typically, the longest clubs in the set are the drivers which range between 43 and 45 inches in length.
What is a driver in golf?
Drivers are the clubs with the longest shafts and largest heads in the complete set stand bag. They are initially referred to as oods,’ but today they come with graphite, titanium or steel construction and now are used to take long-distance shots. Drivers today ranges between 43 and 46 inches according to the manufacturer.
How to measure putter length?
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel. As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options. In Option A, this represents a non-offset center-shafted putter like a Titleist Bullseye. Measuring length is not referenced by the heel, rather the shaft axis so the 48” rule is placed alongside of the putter’s shaft at the point it intersects the ground up to the edge of the grip cap.
What is the best way to measure club length?
Regardless of the method one uses, the key is consistency. This is why there are jigs or fixtures for measuring club length. A prime example would be a product that Hireko offers called the Dynacraft Bench Ruler Soleplate works in conjunction with a 48” aluminum ruler and can be laid flat on a table or workbench. There is a roll pin that the bottom of the club’s sole rests against. This is a rather inexpensive item that can speed up and accura
How to measure golf clubs?
This is how we measure our clubs at Hireko. A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club’s heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
What happens when the heel is raised higher off the ground than the toe?
If the club is placed with the toe raised higher off of the ground than the heel, then the measurement will less than measured with the center of the sole touching the ground. Conversely, if the heel is raise higher off the ground than the toe, then the measured length will be increased. Those not careful in positioning …
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
Mind Your Height
First, you need to consider your height when buying golf clubs. This will basically serve as the backbone that will help you determine the right shaft length for your clubs. Without it, you won’t be able to get fitted properly.
Do Wrist-to-Floor Measurements
But your height in itself can only provide an incomplete estimation when determining the right shaft length for you. To complete the process (and get the most accurate calculations), you need to factor in your wrist-to-floor measurements as well.
Consider Club Type
Bear in mind that the optimal length will vary based on the type of golf club. Take woods or drivers for example. Aside from the swings, shaft lengths also affect its path, and attack angles. Moreover, it will impact how well you make center-face shots.
Check Effects on Shaft Flex
Having the length modified to suit your needs can significantly help you improve your game play. Nevertheless, you should be aware that doing so can affect the shaft’s overall flex, which is also important if you want to excel at golf.
Use Clubs With the Right Shaft Length
Shaft lengths are extremely important, especially since it affects the quality of your swings. Plus, the longer the shaft is, the faster the club head speed will be. So best get the clubs that are long (or short) enough for you.
What is a golf club fitting?
The first type of golf club fitting is a static fit , and as the name suggests, this is a static measurement taken from your finger tip or wrist to floor, trying different lie angle heads and then taking a glove measurement to determine the size of grip required by the golfer. Static fittings are more for golfers with little or no experience and, although not overly reliable, a fitting for length and grip size are better than no fitting at all.
How to find the right golf club size?
Another way to find out the right golf club size for you is through a dynamic fitting. This is a more precise way of fitting and involves the use of a launch monitor to help determine the correct shaft and head to best suit the golfer.
How long is a driver shaft?
In theory, the longer the driver shaft length, the greater the shot distance. Therefore, the longer the driver the better, right? Well, the reality is actually quite different. Even though the Rules of Golf for competition allow the club shaft length of up to 48 inches, Golf Monthly notes that the average driver length used on the tour is ‘only’ 44.5 inches, while the average driver length in golf shops is about 45.5 inches.
What are the factors that are taken into account during a golf fitting?
During the fitting, factors such as ball speed, spin rate, dispersion and launch angle are taken in to account and will help to make sure that the golfer purchases the correct equipment to best suit their game.
What is the importance of accuracy when buying a putter?
When it comes to purchasing a putter, control and accuracy are imperative if you want to get the ball into the hole with the first – or at least with the lowest number of strokes possible.
Is wrist to floor measurement accurate?
Compared to using only height or only wrist-to-floor measurements, the cross-referring golf club length calculators tend to be more accurate when performing a static fitting.
Does size matter in golf?
When it comes to golf clubs, size does matter. While correct golf club size can help you become a better golfer and make the game more enjoyable, inaccurate club length will have the exact opposite effect. But what is correct club size for you? Well, it depends on several factors including the different types of golf club, your swing style, posture and skill level. But above all, it depends on your height. To make the selection easier, Golfsupport therefore prepared a quick golf club size guide for beginners.
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
How to measure your height?
Step 1. Measure your height standing in socks. For the most accurate measurements, don’t try to measure yourself. Ask a second person to assist you. Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5’5") and 69-inches (5’9") tall. For women who are shorter than 5’5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
Where is Jackson Lewis?
Based in Memphis , Jackson Lewis has been writing on technology-related material for 10 years with a recent emphasis on golf and other sports. He has been freelance writing for Demand Media since 2008. Lewis holds a Master of Science in computer science from the United States Naval Postgraduate School.