What is the standard length of a golf club driver?
Let’s find out. What is the Standard Length for a Golf Club Driver? The average length of a driver is 45.5 inches for recreational players, while Tour players’ average drivers are 44.5 inches long. However, as stipulated in the rules of golf, your driver can have a shaft length of up to 48 inches.
How long should my driver be?
How long should your driver be? The standard driver length for men’s clubs is 45.5 to 45.75 inches long. Because women tend to be shorter than men, the standard women’s driver length is usually closer to 44. The 2020 TaylorMade SIM2, Callaway EPIC, PING G425, and Titleist TSi1 come configured at 45.75 off the rack.
How to measure the length of a golf club?
So let us explain several of the methods you may encounter. The method most used to measure the length of a driver, fairway wood, hybrid, iron, or a wedge involves placing the club in the playing position with the center of the sole touching the ground.
Why are golf drivers longer than 48 inches?
Companies have been making drivers longer than 48 inches because they have been trying to cater to the needs of those who have taken up the sport for recreational purposes where there aren’t many rules. This is why tee shots can go as far as 400 yards because they are being hit with drivers that are about 72 inches.
Can Golf Clubs be Lengthened?
Yes, golf clubs can be lengthened, though it’s not an easy task. Most clubs follow a half-inch rule when you look at the different sizes, like in the chart above.
When do You Need Custom Golf Clubs?
When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
Why do putters have longer shafts?
If you had a shorter putter, you’d almost certainly tap the ball too hard most of the time. A longer shaft allows for gradual adjustments instead of quick, direct hits .
What happens if your woods aren’t longer?
If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.
Why do you have to swoop on your golf club?
Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
How many yards can a 44 1/2 inch driver go?
A 44 1/2-inch driver can send the ball 275 yards and a 45-inch driver 275 to 280 yards. As the drivers get longer, there is a diminishing return in increased yardage.
How long should a golf driver shaft be?
Every golfer wants to hit the ball farther, and the quest for maximum length has led many 21st century golfers to opt for drivers with shafts that are 1 to 3 inches longer than the standard recommended length. However, the longer the shaft the harder it is to control the club and hit the ball squarely. You might hit the occasional drive farther …
How far can you hit a 43 inch driver?
A 43 1/2-inch driver yields 262 yards and a 44-inch driver 270 yards . Hitting the ball 20 yards farther — especially if it comes to rest in the fairway — is a significant advantage, allowing you to hit, for example, a 7-iron instead of a 5-iron to the green.
How long is a female driver?
Women’s Drivers. Standard drivers for women are an 1 inch shorter than standard men’s drivers. Previously, the standard length for a woman’s driver was 43 inches. As of 2012, it’s 44 inches. You will see some smaller players on the LPGA Tour using 48-inch drivers that come up to their chin, but the average woman amateur won’t be able …
How long is a driver?
However, in the 21st century a standard driver is considered to be 45 inches.
Can you drive a driver longer than standard length?
If you have a smooth, rhythmic swing, you might be able to control a driver that’s longer than a standard length . But if longer shafts compromise your accuracy, you’re driving for show instead of for score. It’s also vital to match your swing speed and driver length with the correct shaft.
Who is Jim Thomas?
Jim Thomas has been a freelance writer since 1978. He wrote a book about professional golfers and has written magazine articles about sports, politics, legal issues, travel and business for national and Northwest publications.
How Long Should Your Driver Be?
As we mentioned at the start of this article, the best driver for you has the optimal balance of distance and accuracy.
What is the loft of a Taylormade mini driver?
Mini-Drivers – TaylorMade’s " Original One Mini Driver " has a standard length of 43.75", and it has a smaller head (275CC) at lofts of 11.5° and 13.5°. The loft can be adjusted by 2°, allowing it to go as low as 9.5°. Compared to a standard driver head, many golfers will find the TaylorMade Mini to be playable off the ground (depending on the loft).
How to find the correct driver for a golf club?
The best way to find the correct driver is to get fitted by a knowledgeable club fitter. A good club fitter will not only let you try out all the different driver heads and shafts they have available, but also let you try varying length shafts.
How long is a 3-wood driver shaft?
Thirty or more years ago, the standard shaft length for a driver was closer to what we see in 3-woods today, around 43 inches.
What is a 2 wood golf club?
The "2-wood" in this setup will be more of a "fairway finder." The goal is to minimize distance lost compared to your standard driver configuration while significantly tightening the dispersion of your shots. This club will generally have a shorter shaft and more loft.
What size car did Rickie Fowler drive?
Rickie Fowler famously decided to go with just a 43.5" driver in 2017, a year in which he won the Honda Classic.
How long is a standard golf driver?
The standard driver length for men’s clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women’s driver length is usually closer to 44".
How to measure putter length?
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel. As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options. In Option A, this represents a non-offset center-shafted putter like a Titleist Bullseye. Measuring length is not referenced by the heel, rather the shaft axis so the 48” rule is placed alongside of the putter’s shaft at the point it intersects the ground up to the edge of the grip cap.
What is the best way to measure club length?
Regardless of the method one uses, the key is consistency. This is why there are jigs or fixtures for measuring club length. A prime example would be a product that Hireko offers called the Dynacraft Bench Ruler Soleplate works in conjunction with a 48” aluminum ruler and can be laid flat on a table or workbench. There is a roll pin that the bottom of the club’s sole rests against. This is a rather inexpensive item that can speed up and accura
How to measure golf clubs?
This is how we measure our clubs at Hireko. A 48” golf club ruler is placed along the backside of the club with the tip of the rule touching the ground by the club’s heel. The final length is measured at the edge of the grip cap (and not the very top). This method is used in all cases except putters that the shaft is not located at the heel.
Why is the ruler not placed in line with the shaft?
Because the shaft is ahead of the face of the putter, the ruler is not placed in-line with the shaft, rather along the back side of the shaft like an iron would be measured. The difference being that the ruler would touch the ground somewhere other than behind the heel of the club.
What is the USGA method?
USGA Method. The United States Golf Association (USGA) has a method outlined in the Rules of Golf. The USGA uses an apparatus that has a piece of angle iron as a stop that forms at a 60 angle from the horizontal.
What happens when the heel is raised higher off the ground than the toe?
If the club is placed with the toe raised higher off of the ground than the heel, then the measurement will less than measured with the center of the sole touching the ground. Conversely, if the heel is raise higher off the ground than the toe, then the measured length will be increased. Those not careful in positioning …
How long is the LDA?
Depending upon the lie of the driver can also contribute to the final length. The LDA has a 50” length limit for sanctioned long drive competitions.
Should I Get a Custom Fit?
A custom fit can be great, but you need to remember some things. If you are ordering a club that is custom to you, the club shaft is going to be made in such a way that the flex is going to match the club length.
Why is it so hard to make contact with the golf ball?
As the length of the shaft increases, a lot of golfers can have a difficult time making their delivery consistent with the club, and this means that it can be more challenging to make contact with the ball. In this case,
What happens if your putter is too long?
If your putter is too long then you are more likely to be inclined to stand much further away from the ball. This means that your aim may end up to the left of your target, as your eyes are inside rather than over the ball.
How long is a standard golf club?
5 foot 9 inches to 5 foot - A standard club length will suffice.
What to do if you aren’t sure what fit is best for you with a putter?
If you aren’t sure what fit will be best for you with a putter then you should try to have a proper fitting with somebody who knows what they are doing. Again, length can have a big impact on this particular golf club.
What happens if you have a shorter shaft?
If you have a shorter shaft then it is going to feel stiffer, so you are probably going to need to change your power and swing to work with a stiffer club.
How to tell if a golf club is too short?
First of all, the path of your swing goes from in to out. You will find that when you are trying to take your shot that you are needing to excessively bend at the waist area.
What Are Standard Length Golf Clubs?
As you can see in our golf club size chart above these would typically fit in the 34″ to 35.5″ range.
Why is it important to know the size of your golf clubs?
This is because if you use golf clubs that are either too tall or too short for you there is a chance that you won’t hit shots consistently and more distance.
Why is it important to choose the right golf club size?
These range from having a better connection with your shots and hitting them from the correct lie angle. Both of these benefits will contribute to your achieving a better golf handicap score.
What does it mean to use the correct size golf club?
When you use the correct golf club sizes you will be hitting your shots with the ideal length club which will help you to get a solid contact on your shots. This accurate measurement can help you to achieve consistent contact by ensuring the club face is squared properly at impact.
How does the handicap index work?
The golf handicap index works by calculating your score s from previous rounds. Therefore with better shots you are more likely to achieve better scores on the golf course.
How to determine what length golf clubs to buy?
Using your height and then your wrist to floor measurements is a great way to get an idea of what the right length of clubs will be.
Why are golf clubs so complex?
The reason that golf club sizes can be a complex topic is because it isn’t as easy as just saying that height is the only factor in which size to choose. In our complete guide we will explore what other factors are at play and what some of the main benefits are from taking the time to choose golf club sizes bespoke to yourself.
What is the best material for a wood club?
Titanium or graphite is prominent in the design and construction of a wood club. These unique metals allow for a lighter club weight, and allow the ball to travel further. With a longer shaft and larger head a wood is easily spotted in a set of clubs.
How long do golf clubs last?
With proper care, the average set of golf clubs has a lifespan that can last at least 10 years. For the average golfer, this equates to playing 300 rounds of golf. Drivers and Woods have a shorter life expectancy of only 2 to 7 years.
Why are drivers shorter?
Another reason for the shorter life expectancy of a driver is due to them being made differently from other clubs. While titanium is an excellent material for a driver, stainless steel is still the favorite when it comes to your irons and other clubs.
What is a wood golf club?
Another often used type of golf club are the woods. The term wood goes back to the time when club heads were actually made from wood. Although wood was replaced with metal, the name has continued to live on.
What does it mean when your shots go higher?
If you notice your shots travelling higher and further than usual, this is a sign that your grooves need checking. This may sound like an advantage, but your accuracy will surely be decreased.
What is a driver head made of?
Generally speaking, a driver head will be made from primarily titanium. However being an alloy, it won’t be made from 100% titanium. Small amounts of other metals like aluminium and vanadium are mixed in to produce a better mold. In the 1990’s Titanium was a revolutionary innovation in the golf club industry.
How many drivers has John replaced in 6 years?
John has replaced 3 drivers in 6 years, while mark seems to get 3-5 years life out of each driver. Knowing John, this isn’t too surprising as he does have a heavy hand to say the least.