[tp widget="default/tpw_default.php"]
 

Tag: what is the stiffest golf shaft

what is the stiffest golf shaft

what is the stiffest golf shaft插图

X

What are the different types of golf shafts?

Traditionally, modern golf shafts are sorted into one of five shaft flex options: extra stiff (X), stiff (S), regular (R), senior (A), and ladies (L). The most common in off-the-rack clubs is regular flex. And in most cases, that’s actually an OK stiffness for most recreational golfers.

Why do golf shafts have different amounts of stiffness?

Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings. The slower a golfer’s swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs.

How do I choose the right shaft flex for my golf clubs?

Knowing your swing speed and carry distance can help you select the right shaft flex for your golf clubs. These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.

Are off-the-rack shafts good for most golfers?

The most common in off-the-rack clubs is regular flex. And in most cases, that’s actually an OK stiffness for most recreational golfers. Why is the regular shaft good for most golfers?

What does stiffness mean in golf?

Stiffness of a shaft indicates how much it will bend during a shot; different types of golfers require shafts with different stiffnesses. If you swing the club with little speed and your ball travels a short distance, you probably need a shaft that will bend a lot when you hit the ball.

Why don’t professional golfers use stiff shafts?

Interestingly, many touring professional golfers do not use the stiffest shafts in their drivers because they allow the club to do more of the work. Read on for more information about the right shafts for you and your game.

How to choose shafts for golf?

Choose shafts that simply “feel” good to you. While there are technical ways to match shafts with clubs based on how you play , at the end of the day, the correct choice is one that gives you confidence. If there are doubts about which shafts to buy, hit some shots with various types of shafts to see which feel the most comfortable to you.

How far can you hit a senior golf ball?

If you hit the ball about 200 to 225 yards, Seniors shafts are probably right for you. If you routinely can hit it about 250 yards, pick Regular shafts. But if you hit it longer, choose Stiff ones. And unless you pound the ball 300 yards or more, stay away from shafts that are Extra-stiff.

How far can you hit a golf ball with a driver?

For example, if you strain to make the ball fly about 175 yards, you probably should have Ladies shafts. If you hit the ball about 200 to 225 yards, Seniors shafts are probably right for you.

Where did Bill Herrfeldt graduate from?

Bill Herrfeldt specializes in finance, sports and the needs of retiring people, and has been published in the national edition of "Erickson Tribune," the "Washington Post" and the "Arizona Republic." He graduated from the University of Louisville.

Do you have to have the same shafts on every golf club?

Realize that you don’t have to have the same shafts in every club. For example, you might benefit from a less rigid shaft in your driver and possibly your hybrid clubs for more distance, but you may pick a stiffer shaft for your mid-irons and wedges where you place a great premium on accuracy and less on distance.

What was the PCS equalizer?

They established a standard primarily focused on one of the instruments. Software knows as “The Equalizer” was sold to PCS members. It came with a calibration stick that was used to standardize the readings to a common denominator across instruments. During its dominance as a club makers organization the PCS did not promote discussion of alternative shaft stiffness systems. Nor did it inform its membership that the shaft designers and manufacturers primarily used EI for understanding shaft stiffness.

What is PCS in golf?

Inspired by the research done by the Braly’s, a club makers organization, the PCS, endorsed and taught frequency based club making to its many, many members. it was a time when shaft design was not as complex as it currently is and when frequency instruments were one of the few tools available to club makers for measuring shaft stiffness.

What is equalizer software?

It came with a calibration stick that was used to standardize the readings to a common denominator across instruments. During its dominance as a club makers organization the PCS did not promote discussion of alternative shaft stiffness systems.

Do golf shaft stiffness rates work across brands?

The systems we have to rate golf shaft stiffness do not work across brands or even across models within brands. Most experienced club fitters use their experience to understand golf shaft stiffness. Many use some systematic method, most often frequency, to rate the shafts they work with.

Is shaft frequency used in stiffness?

Shaft frequency is not of much use in evaluating shaft stiffness. The problem for club makers and fitters who recognized the importance of shaft profiling was that there was not an affordable EI instrument until I designed and manufactured one. They used the frequency instruments they had. As with all technologies, instruments and expertise evolves. Frequency profiling and frequency rating of shaft stiffness were an attempt by club builders to reverse engineer shaft knowledge not shared by the shaft companies. Affordable EI instruments have closed the knowledge gap between the shaft engineer and the club fitter.

Who invented the rate of oscillation of a shaft?

Dr. Joe Braly introduced club makers to using the rate of oscillation of a shaft (frequency) to understand its stiffness. In the 80’s he did research on the PGA tour. He used a frequency instrument to measure the shafts used by the tour players. From this research, he developed a formula for the stiffness of ratio of the different irons in the set. The ratio he found was 4.3 CPM (cycles per minute) per one half inch of length of club.

Who first discussed shaft oscillation frequency?

The concept of using shaft oscillation frequency was discussed in the 1968 book, “Search for the Perfect Swing” by Alastair Cochran and John Stobbs. “Search for the Perfect Swing” is one of the first explorations of golf technology.

What is TPT golf shaft?

With TPT golf shafts, the variances are eliminated. Every shaft that’s produced is identical to the one you tried during a professional fitting. And because of TPT’s automated manufacturing process, Continuous Fiber, golfers have more opportunity to find the ideal shaft stiffness rather than “getting close,” which is all other manufacturers can do. To that end, in Sinclair’s robot testing against hand-rolled shafts, “TPT was far superior at bringing the club back to the same spot with each swing.”

What is the stiffness of a golf shaft?

TPT Head of Performance Jon Sinclair explains that “the stiffness of a golf shaft is the ‘kick’ in the shaft. This must be right so the player can get the maximum speed from the clubhead.” In other words, without getting properly fit into the best golf shaft for your swing, you’re leaving MPH and distance on the table.

How to get the most out of golf clubs?

In order for you to get the most out of your golf clubs, you have to start by knowing your ideal golf shaft stiffness. Most golfers buy off-the-rack golf clubs with a regular or stiff shaft installed by the manufacturer. But is that golf shaft the correct stiffness for your swing and golf game?

What does it mean when a golf shaft is stiff?

Simply put, golf shaft stiffness is how easy or difficult it is to bend the golf shaft. Easier to bend means the golf shaft is on the softer side. When it becomes very difficult to bend, it’s getting stiffer and stiffer.

Why is a regular shaft good?

Why is the regular shaft good for most golfers? Well, most golfers either don’t play a lot, don’t get properly fit, or simply don’t swing the golf club fast enough to need a stiffer golf shaft. However, getting properly fit for your golf swing, swing speed, and tempo is crucial to unlocking not only personal potential but maximum golf club performance. Luckily, with today’s launch monitor technology, years of data, and research it’s easier than ever to get fit with precision.

Why should the shaft be perfectly whipping through the hitting zone?

In other words, the golf shaft should be perfectly whipping through the hitting zone to maximize the speed of any player’s swing. Almost like bending a plastic spoon to fling food across the cafeteria. To do this also includes factoring in the launch conditions. Some players prefer a low launch while others require high launch shafts.

What happens when you don’t fit your shaft?

Normally, when golfers aren’t fit for proper shafts they can struggle with dispersion. In other words, if you drew a circle around all a golfer’s shots with a single club, how big would that circle or oval be? In an ideal world, you want that oval to be as small as possible. That way, even your worst golf shots aren’t that bad.

What is shaft flex?

Shaft flex is a description of how much a shaft will bend under the force of a golf swing with a head attached at the tip end. The speed and frequency of your swing will determine what flex you need. There are generally 5 different flex notations (from most bendable to least bendable): A-flex (Senior), L-flex (Ladies), R-flex (Regular), …

What size shaft tip for golf club?

The shaft tip size is the the diameter of the tip portion of the shaft. For irons, this will usually be 0.370" (parallel) or 0.355" (tapered). For woods, it will be either 0.335" or 0.350". To choose the tip size needed, you’ll want to match it with the ID (inside diameter) of the hosel of the golf club head.

What is a golf shaft?

Many consider the golf shaft the "engine of the club". Golf shafts are either made from graphite or steel. Both types have its benefits and disadvantages. Either way, the golf shaft is where power is stored and released at impact. Sitting in between the golf grip and club head, a solid connection is what allows the golf shaft to do its job. So when choosing a shaft, it’s important to know what specifications to look for. The golf club head and golf grip will each have their own specifications/measurements as well, and having all this information on hand can guide you to choose the right shaft, as well as ensure the club assembly process goes smoothly. Here are 5 golf shaft specifications you’ll want to know:

How long is a 0.370" iron shaft?

decreasing in length from #3-PW). 0.370" parallel iron shafts arrive in uncut lengths, usually 41" or 42" for irons or 46" or more for woods.

What happens if you swing too heavy?

If the overall club is too heavy, you can lose swing speed which can result in a loss of yardage. Too light of a club will be hard to guide and control which can lead to mishits. Players with faster swing speeds or more accelerated tempos can benefit from heavier shafts.

What does it mean when a golfer’s swing is slower?

The slower a golfer’s swing, generally speaking, the more flex he or she requires in the shafts that are in their golf clubs. And the faster the swing, the more stiffness. Tempo also matters: A jerkier swing requires more stiffness, a smoother swing less stiffness, generally speaking.

Why do golf shafts bend?

Shaft makers vary the amount of stiffness because golfers have different types of swings—different swing speeds, different tempos—and different amounts of stiffness in a shaft better match up to those different swings.

What happens if you mismatch your golf shaft?

If your swing is mismatched to your golf shaft flex—if you are using an X flex shaft, for example, when you should be using an R flex shaft—you will have a harder time squaring the clubface at impact. The way your shots are flying can clue you into the possibility you might be using the wrong flex.

How to choose shaft flex?

These are just general guidelines, however; the best way to choose shaft flex is to go through a club fitting. Not every golfer can (or is willing) to do that, though.

What do the letters on a golf shaft mean?

Golf shafts are designated with a letter code, the letters most commonly being X, S, R, A, and L . What do these letters represent? Those letters tell golfers flex—the relative stiffness—of that shaft.

Why is senior flex represented by an A or M?

Why is senior flex represented by an A or M? " A" originally stood for "amateur." The "M" stands for "mature" or "medium." Also, of course, "S" is taken by "stiff."

When were steel shafts invented?

Alas, no. Golf industry veteran Tom Wishon, of Tom Wishon Golf Technologies, explains: "Shortly after steel shafts were introduced in the 1920s, steel shaft makers discovered they could change the diameter and wall thickness of the tubes to create shafts with different amounts of stiffness to better match to the different swing speeds …